info@horizonroofingspecialists.com  |  New Braunfels: (830) 515-3434  |  Austin: (512) 879-1530

DURO-LAST COATINGS & INSULATION

With constant exposure to heat, cold, UV radiation, rain, snow, hail and high winds, a roof can be the most vulnerable component of a building’s exterior. However, a roof’s long-term performance can be enhanced – and major roofing problems avoided with correct design, quality materials, proper installation and workmanship, and comprehensive care.

Duro-Shield Silicone Roof Coating

Duro-Shield Silicone is a silicone-based roof coating designed to resist natural weathering while providing long-lasting watertight protection. When properly prepared and applied, following Duro-Last specifications, Duro-Shield Silicone can be used on the following roof substrates:

  • Single-ply membranes:
    • Aged Duro-Last PVC (polyvinyl chloride)
    • Other aged PVC’s
    • EPDM (ethylene propylene diene monomer)
    • TPO (thermoplastic polyolefin)
  • Spray-applied polyurethane foam
  • Mineral and granule-surface built up (BUR) and modified bitumen
  • Smooth-surfaced built up (BUR) and modified bitumen
  • Aged galvanized metal
  • Concrete
  • Wood

Duro-Shield Acrylic Roof Coatings

Duro-Shield Acrylic Roof Coatings available in Duro-Shield 20 and Duro-Shield 10 – are 100% elastomeric acrylic and are designed to seal and protect a variety of substrates. When properly prepared and applied in accordance with Duro-Last specifications, the Duro-Shield Acrylic line of roof coatings can be used on a variety of roof substrates.

Duro-Shield Acrylic Roof Coatings

Duro-Shield Acrylic Roof Coatings available in Duro-Shield 20 and Duro-Shield 10 – are 100% elastomeric acrylic and are designed to seal and protect a variety of substrates. When properly prepared and applied in accordance with Duro-Last specifications, the Duro-Shield Acrylic line of roof coatings can be used on a variety of roof substrates.

Duro-Guard ISO Insulation

Duro-Guard ISO products come in a variety of thicknesses and facers for different attachments to meet different wind uplift requirements. Panels come in flat stock in 4′ x 8′ and 4′ x 4′ sheets. Facers include fiber reinforced paper, coated glass and double coated glass

Duro-Guard EPS Insulation

Duro-Guard EPS products come in a variety of thicknesses and are lightweight and resilient. Panels come in flat stock with PVC-compatible facers. Facers include polyester, fiberglass, nail base or the Class A fire rated FR-10

Duro-Guard EPS Insulation

Duro-Guard EPS products come in a variety of thicknesses and are lightweight and resilient. Panels come in flat stock with PVC-compatible facers. Facers include polyester, fiberglass, nail base or the Class A fire rated FR-10

Reducing Your Time on the Roof

By custom fabricating most of the seams in the factory, the Duro-Last Roofing System is designed to help you reduce installation time. But the efficiency doesnt stop there. We know all the pain points that cost you time and material on the job site and offer products and accessories to help you minimize them.

PRE-CUT CRICKET

Made of expanded polystyrene, these custom fabricated crickets virtually eliminate the time and waste material required to make crickets on-site

PRE-CUT MITER

These dimensionally stable 4 x 4 panels offer a simple, prefabricated valley or hip solution. Made of closed-cell polyiso bonded to reinforced facers, they are available in a variety of slopes and thicknesses and are compatible with standard tapered panels

TAPERED EDGE STRIP

Duro-Guard Tapered Edge Strips can be used for a variety of insulation transitions, including crickets, drain sumps and perimeter slope enhancement. The 96 panels are made of polyiso foam with reinforced facers and are available in two widths to create slopes of 1″ or 1.5″ per foot

Request An Estimate Today...

Our experienced team of estimators are always ready to help out with an on-site consultation.  We will answer any questions about your next roofing project and develop a strategic scope of work to get you over the finish line.

Request An Estimate Today...

Our experienced team of estimators are always ready to help out with an on-site consultation.  We will answer any questions about your next roofing project and develop a strategic scope of work to get you over the finish line.

What Else Can We Do For You?

Horizon Roofing Specialists is proud to serve the New Braunfels and Central Texas area. Our employees are professionals, and we expect to treat every customer like family. It is a privilege to earn the right to work on your property, and we will act accordingly. Each project is supervised by our experienced project managers with over 25 years of roofing experience to ensure we provide the products and services you expect.

Verified by MonsterInsights